Tuning the MG RV8

"Thank you for reading this MG RV8 tuning guide."

The RV8 is a awesome tuning project to have. Take your time and research RV8 tuning to save yourself making the usual costly errors we often.

The RV8 is a heavily modified MGB and tried to retain the original look and feel of the original with modern improvments.

Welcome to our "Tuning the MG RV8" and best RV8 performance parts guide.

Our aim here is to review and look at RV8 tuning and report on the greatest mods that work. MG RV8 offer good returns when tuned and with the optimum tuning upgrades like remapping, turbo upgrades and camshafts you will certainly maximise your driving experience.

Tuning tips and articles

Engine tuning Transmission tuning Care care Intake & exhaust mods Improve handling Forums

Handling/Suspension upgrades

Handling modifications are the thing most do first for the RV8.

If you set the toe out to 1-1.7 degrees on the front, and add a small amount of negative camber then cornering will usually improve.

Drop the car by as much as 28mm - 36 mm. and fit uprated stiffer dampers, bigger drops will need other modifications in most instances.

A nice wide torque band and sweet spot of peak power at one third of your RPM range is optimum.

Keep it looking standard but remove the badges for the ultimate sleeper!

Smaller engines do not provide much of a return in terms of power so start with a bigger engine. Engine swaps are a good option if you have a small engine size.

Engine tuning mods.

These are the modified kits are usually carried out by our members, decide how far you wish to go in your tuning project before you get going.

The RV8 boasts an all alloy V8 cylinder 3947cc engine and 6 second sprint to 60mph.

Getting the right uprated upgrades for your planned usage of the car is essential. Stage 3 competition upgrades just don't work well on the road making the car difficult to drive.

Please watch our introduction Video tutorial to car tuning. Be sure to subscribe and support our new channel.

How to tune your car

  1. Improve the handling

    Focus on Suspension improvements, such as coilovers and make sure the bushings are in good order and that the alignment is correct. Then focus on improving the brakes, with a big disk brake conversion kit and fast road brake pads.

  2. Remove restrictions

    Focus on the intake and exhaust with filters being the common point of restriction in a tuned car. Intercoolers may also become restrictive on turbo engines so this may also need to be uprated.

  3. Burn more fuel & air

    Increase the fuelling so it matches the air coming into the engine. The ratio is important so you need to improve the fuel pump and injectors, so the head mods, big valve conversions, fast road camshafts and forced induction upgrades extra supply of air is adequately met.

  4. Test and replace any weak parts

    Weak areas are commonly the clutch, the turbocharger and pistons and crankshaft in a highly tuned engine. Makes sure these components will cope with your power aspirations.

  5. The Tune or Remap

    A cars ECU controls the fuel, timing, spark and even the turbo in some cases, so to fully extract your gains you should remap the car last and this will fully release the power. Some cars are easy to map, and others require piggyback ECU's or aftermarket ECU's but this is the most vital step of your tuning project.

Modifying to Stage 1:

 Alloy wheels, Suspension upgrade (drop 28mm - 36 mm.), Sports exhaust, Panel air filter, Remap, Lighter flywheel.

Modifying to Stage 2:

 high flow fuel injector, Fast road cam, Ported and polished head, Power/Sport clutch, fuel pump upgrades.

Modifying to Stage 3:

 Sports gearbox, Competition cam, Engine balancing, Internal engine upgrades (pistons/head/valves), Adding or upgrading forced induction (turbo/supercharger).

Peak power is nice in motorsport but for a daily driven car you need a wide torque band and perhaps extending the rev range.

In this article we shall give a little insight into the world to the best modifications for your car, but we'd encourage you to spend some time on the site looking into the details of each type of performance modification.One of the most cost effective mechanical sports mods you can do on your NASP engine is to fit a fast road cam .

The exhaust and intake flow play a major role in your cars power band, but be careful here, getting this wrong can upset the idle and make the car challenging to drive in traffic. You'd need to follow a camshaft upgrade with other mods and finish with a performance chip to fully realise your gains.

When pushing up the power you will need to ramp up to the fuelling. More power needs more fuel.

If you find you get flat spots and power surges after your modified parts you should check the fuelling and try a higher octane fuel as well. Uprating the injectors is another beneficial modification and will deliver sufficient fuel.

A fuel pump will only deliver a finite amount of fuel, so you may need to uprate this if your injectors are demanding more fuel.

Intake and Exhaust Tuning.

Breathing mods are usually next up.  Please note that WE DO NOT RECOMMEND INDUCTION KITS, unless you have tuned your car with over 30 percent more power and are finding that the standard air intake has become the bottleneck.

Induction kits can work well on turbo engines and larger engines (if supplied with a suitable cold air feed or air box), generally though we'd just recommend for RV8 engines you should just fit a performance panel air filter preferably made from cotton.

Sports exhausts can help equal out the flow of gases through the engine. But if the exhaust pipe is too big, ie: it's over 2.5 inches bore, you will lose a lot of the flow rate and end up losing power and torque.

Airflow through the head can be dramatically increased with some professional gas flowing. These should match and be setup to take into account any other engine mods. Your clutch can seriously let you down if it starts to slip and the standard clutches are only ever good for power gains of up to 48%. Fit an uprated clutch to avoid power loss through the transmission. The best mods in our experience for your RV8 are Remapping or piggy back ecu, fast road cam and air intake and exhaust.

NASP engines do not achieve big power gains if you remap them, unless you have done extensive modifications. With turbocharged engines this is another story. A remapped turbo will give phenomenal power gains and take full advantage of the strength of the block.

We've also come across some owners toying with twincharged applications and making some impressively high power gains.

The most significant power gains for NASP engines usually involve the addition of forced induction. It is generally simpler to bolt on a supercharger than it is to bolt on a turbo. Turbos provide boost in exponential proportion to rising engine speed and this can make mapping difficult.

It is more straightforward to map a supercharger because the boost is proportional to engine speed on a linear curve. Adding forced induction will often require a lower compression ratio or water injection.

Alloy wheel upgrades.

Alloy wheels will help the brake cooling and are generally less heavy than the steel ones. Get a good directional tread pattern tire to improve your handling and help improve traction on your RV8. Large RV8 alloy wheels can decrease performance. If you get big alloy wheels you will be changing your final drive ratio.

Because of this try to keep the overall rolling diameter of the wheel the same as supplied from the factory. In all cases not going larger than 18 inches.

For more information on Tuning your car please join us in our friendly forum where you can discuss RV8 options in more detail with our RV8 owners. It would also be worth reading our unbiased MG tuning articles to get a full grasp of the benefits and drawbacks of each modification.

Please help us improve these tips by sending us your feedback in the comments box below.

We love to hear what our visitors have got up to and which mods work best for them on each model of car. Comments are used to improve the accuracy of these articles which are continually updated.

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Check out TorqueCars new YouTube channel, and see their awesome new content...

Feedback

Please use our forums if you wish to ask a tuning question, and please note we do not sell parts or services, we are just an online magazine.

Help us improve, leave a suggestion or tip

Your Constructive comments on this article





TorqueCars Forums

Join TorqueCars our sister site to read over 300,000 posts on modified and tuned cars and tips.

This will also allow full access to their car project features, gallery and some and exclusive member only areas.




Forum Hot topics



Brake Fade

What is brake fade and what causes brake fade?
Read more...

Rebore Engine

Increase engine displacement with a rebore.
Read more...

Steering Wheels

Aftermarket steering wheels
Read more...

Painting Calipers

Tips on brake caliper painting.
Read more...

Drifting Techniques

How to drift. Drifting techniques
Read more...

Best Car P2

Our look at the best coupe, classic, automatic, and Diesel cars
Read more...

MPG Calculator 2

MPG calculator UK miles per Gallon – calculate MPG
Read more...